|What's New on the Building Board|
July 29th, 2015
Laminated parts can be made with nothing more than balsa strip, 50/50 white glue/water, and sewing pins. And without turning on the stove during 90 degree weather.
I used a simple home-made balsa stripper to make lamination strips, then soaked them in hot water. Mini clothes pins keep buoyant balsa from popping out of water while it soaks.
Here's the canopy outline of my new Luscombe Model 10 No-Cal.
And the outlines for the Luscombe Model 10 tail fillet and the tail trailing edge . . .
Michael A. Morrow's AERO ACES - Doing Business since 1995 !
AERO ACES is a TRADEMARK of Michael A. Morrow.
© All Images, drawings, plans, articles, and kits, are Registered
& Copyrighted by Michael A. Morrow